LUCIS LINE

They represent the cutting edge of this segment

LUCIS LINE sliding shower screens represent the top of this segment. Their above-standard 2 m height optically brings more space and light to the shower enclosure. Square profiles and ball travel housings give this series a modern look. The new design of the wall profiles allows a tolerance of 20 mm in the adjustment and concealment of the adjusting screws, which are now only accessible after opening the cover strip. The horizontal sealing profiles are elegantly inserted into the aluminum profiles and their service life is significantly extended. The long and slim, discreet handles underline the uniqueness and design of this series.

General characteristics of LUCIS LINE series shower screens

FACE

  • Above-standard height 2 m (normal height of sliding screens is 1.9 m)
  • Choice of up to 66 floor plans from doors to semicircular screens (doors can be combined with side walls)

CONSTRUCTION

  • For higher rigidity of the screens, some parts were made of 8 mm glass (especially the vibration of 6 mm doors was suppressed)
  • The fillings are made of tempered safety glass according to the EN ČSN 14428 standard (evidenced by a declaration of conformity)
  • Sealing profiles are embedded in aluminum profiles (extension of seal life compared to plug-in plastic profiles)

DESIGN

  • The shape of the polished aluminum profiles corresponds to the square design of the cast marble trays
  • The sealing profiles are hidden in aluminum profiles
  • Cover aluminum bar for adjusting screws (screw heads are not visible inside the screen)
  • Elegant long and slim handle made of polished stainless steel (length 340 mm)
  • Double bearing wheels hidden in a square housing
  • Chrome top profile covers

MAINTENANCE

  • ANTIDROP surface treatment of glasses for easy cleaning (applied during glass production)
  • Easy to clean: simply push the lower slides to fold the door inwards
  • For glass cleaning, we recommend ASC cleaning and protective agent, 94000

RELATED

  • Possibility of additional gluing of the chrome towel holder directly on the glass (especially on the side wall)

CONSTRUCTION

  • The screens are delivered in a partially assembled state (the glasses are set in aluminum profiles)
  • A drill, spirit level, screwdriver and sanitary silicone sealant are required for installation
  • For tightness, apply silicone only to the external joint between the aluminum profile and the tray
  • Easy installation is possible with a pull-out wall profile in the range of 0-20 mm

Products in series