Customized products

FLEXIA and MITIA shower trays made of cast marble can be supplied in atypical dimensions (eg 82x88 cm). In addition, they are a solution for shower enclosures with an irregular shape. The only restriction is that the cut must be straight (shortening, bevel). The tray cannot be cut to a radius (arc).

FLEXIA - example of a cut                          FLEXIA - příklad řezu                          

FLEXIA
When entering dimensions, it is important to count with a tolerance for precision cutting. Baths are cut to sizing saw machine with a tolerance of ± 2 mm per meter cut. The subsequent cut is not visible. The location of the siphon is fixed and can not be changed. Considering the floor strength it is recommended to cut the floor, by at least 15 cm from the centre of the siphon. Due to expansion joints, we do not recommend installing trays under the tile. A surcharge according to the valid price list is added for the size adjustment.

The standard design of FLEXIA trays is white. For an additional 30% to the basic price, the tray can also be supplied in a colour according to the RAL gloss swatch.

It is necessary to buy a siphon with a cover for the FLEXIA product: there is a choice of cover in stainless steel, white, black and gold matt.


For square and rectangular trays

For quarter-circle trays

TRENECA
The shower tray can be cut to the desired size. The cut must be straight (shortenings, bevels, cut-outs). The subsequent cut is not meant to be visible. The position of the waste hole is fixed and cannot be changed. Due to the tray bottom strength, it is recommended to cut the bottom at a distance o fat least 15 cm from the center of the waste. We do not recommend installing the tray under tiles because of the expansion joint.

The TRENECA trays must be complemented by a waste with a cover: the cover is available in stainless steel, white, black, grey and beige.

MITIA
When entering dimensions, it is important to count with a tolerance for precision cutting. Baths are cut to sizing saw machine with a tolerance of ± 2 mm per meter cut. The subsequent cut is not visible. The location of the siphon is fixed and cannot be changed. Considering the floor strength it is recommended to cut the floor, by at least 15 cm from the center of the siphon. Due to the dilatation is not recommended mounting trays under the tiles. Resizing is free.

MITIA trays are available in white, grey and black.

    

Brand


Series



Colour





Material

Radius


Length (mm)

Width (mm)

Height (mm)

Reset
  • Products
  • Price (Low To High)
  • Price (High to Low)
  • Series
page: 1 ...
the number of displayed products:
Total: 123
page: 1 ...