Convenient and practical hanging towels
The flat rectangular profiles in a thin design are practical and provide higher heating power to the radiator.
The radiator can be hung on both sides, you can choose the left or right variant of the installation.
Combination of central and electric heating
Options for "central" connection of heating ladders
1. Central heating - hand valve
CUBE Set COMPACT Set Copper Screw ALU Plug Covering Rope
If you decide to buy a ladder of this type, you need to choose a suitable attachment kit.
If the heating is to be used only for hot water heating without a thermostatic head, it is necessary to purchase a connection kit such as COMPACT or CUBE (according to heating design).
The CUBE is available in chrome, stainless steel or silver.
The COMPACT kit is available in chrome only. COMPACT and CUBE do not distinguish the right / left variant.
ADVICE! Tail pipe openings are not always perfect, so we recommend that you buy a set of cover rosettes. Covering rosettes serve to cover Cu or Alupex pipes and unclean openings in the wall. Covering rosettes are available in chrome or stainless steel.
ATTENTION! Our design valves have a special thread 24-19, so for each valve we have to buy the recommended clamping fittings according to the material and diameter of the pipe - copper / alupex.
Clamps are available in chrome or stainless steel.
2. Central heating - valve with thermostatic head
TWIN connection Copper fittings ALU coupling Covering rosette
If you decide on a thermostatic variant, we recommend the TWIN design :
The TWIN set is available in chrome or stainless steel.
ADVICE! The TWIN set is available in right / left variant. The figure above shows the left option. This means that the hot water supply is to the left, as well as the thermo head itself on the left (always at the front view). We recommend selecting the valve so that the head always faces in the direction of the horizontal profiles of the heater and not on the opposite side.
ATTENTION! The above-mentioned clamping fitting for heating assembling + cover rosette.
Available color variation of clamping fitting - chrome or brushed stainless steel.
3. Combined heating - valve with thermostatic head
Heating rod Copper fitting ALU coupling Covering rosette
If you decide to use the heater for both hot-water and electric heating, we recommend the TWIN COMBI connection set + heating rod :
ATTENTION! Again, choose the right version of the left / right side, see the information above.
TWIN COMBI is available in chrome or stainless steel.
ATTENTION! Clamping screw + cover rosette.
Available color variation of clamping fitting - chrome or brushed stainless steel. Covering rosettes are available in chrome or stainless steel.
ADVICE! The heating rod can be retrofitted, but this option is not recommended due to the probable need to dismantle the heating ladder and release the heating circuit. To select the heating rod, refer to variant 4.
Available color variation of chrome fitting or stainless steel. Covering rosettes are available in chrome or stainless steel.
4. Electrical heating - with thermostatic heating rod
When choosing electric heating we offer a wide selection of heating rods - ONE, ONE-D, MOA, KTX, GV ...
ADVICE! The heating rod selects the client according to his own taste, design and performance!
ATTENTION! The heating rod must be of adequate power according to the specification of the heater or the closest lower possible.
If the heater is heated only electrically, it is necessary to fill the heater with an anti-corrosion freeze-free anti-corrosion fluid such as LIKIDO . It is also necessary to purchase a ½ "plug for radiators.