PUNCAK 60x60 / 40x120

Wall tiles

Floor tiles

Properties

BrandSapho
Size60x60 / 40x120
ShapeSquare, Rectangle
SurfaceMatt, Relief surface
ColoursBeige, Brown, Gray
TextureConcrete
CharacterRectified, Porcelain, Frost resistance
CategoryWall tiles, Floor tiles, Stone & Concrete

Explanations

Matt

Matte surface

Matt glaze tile.

Relief surface

Relief surface

The side view of the tile is modified into a plastic view.

Rectified

Rectified tiles

Rectified tiles are also known as dimensionally stable tiles. These are tiles that have been mechanically trimmed to a certain size after they have been fired so that their edges are 90°. Achieved uniform size, consistency and optimum precision give the tile a cleaner finish and fewer deviations between tiles.

Porcelain

Porcelain tiles

By pushing into the mold under high pressure remains in the ceramics minimum of air bubbles. It is then fired at high temperatures, making the final product hard, strong and abrasion resistant. At the same time, it is less absorbent. Located universal use in interior and exterior, on walls and floors. Sintered paving is especially suited to high-stressed areas such as tiles or building facades.

Frost resistance

Frost resistance

Frost resistance is determined by the degree of water absorption of the tile (ie it does not provide water to freeze it). For tiles for indoor use is not required frost resistance and moisture absorption is usually more than 10 %. In contrast, frost-resistant glazed tiles have an absorption of up to 3 %. For exterior are suitable sintered tiles with water absorption below 0.5 %.