PLUS Aluminium Radiator 2340W, 1618x581mm, white

Plate aluminum radiators in a modern simple design with a smooth face
removed from the offer
Logo: Ridea
Order codeRDP50020

Description

Properties

Brand   RIDEA
Series   PLUS
Size   1618x581 mm
Width   1618 mm
Height   581 mm
Colour   WhiteWhite White
Material   Aluminum
Shape   Retro
Possibility of heating   Central heating
Spacing connection   500 mm
Output   2340 W
Weight / Piece   28.7 kg
Packing   1 Piece
Guarantee   2 years

Explanations

Central heating

In the case of central heating, the selection of the connection valves is very important. You can choose between using a manual valve or a valve with a thermostatic head.

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (Ø15 mm for copper and Ø16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.

Towel rail with a 50 mm connection spacing
Towel rail with side connection
Towel rail with a single-point connection

Series description

Overall, they act cleanly and are suitable for any interior. They provide superior heating performance even at low media temperatures. The vertical pitch of 500 mm is suitable for replacing old steel and cast iron radiators.

Central heating

Advantages of aluminum radiators compared to steel, cast iron radiators and underfloor heating.

SMALL WATER QUANTITIES

Aluminum radiators need significantly less water to achieve the same heat output than steel and cast iron radiators. The same heat output is achieved in shorter time, even when using less power boilers.

SAVING TIME TO HEAT

Aluminum is the ideal heat transfer material. This property makes it a great material for the production of radiators.

SMALL AREA

Due to its physical and mechanical properties, various shapes and interesting surfaces can be produced. This property is used to save space. The same thermal parameters can be achieved with smaller dimensions than those achieved with steel or cast iron radiators.

WEIGHT REDUCTION

The biggest advantage of aluminum, which has made it one of the most widely used materials in various industries, is undoubtedly its weight. The concept of light alloys is very often associated with aluminum, which is about 3 times lower than the weight of steel. The properties of aluminum allow room heating with extremely light radiators, the radiator is better handled and its installation becomes much easier.

BETTER TEMPERATURE FLEXIBILITY

Aluminum allows for a lower weight, less water and faster temperature changes in the space heating. The flexibility, which only aluminum offers, will satisfy all the requirements for maximum comfort.

REDUCTION OF COSTS UP TO 20% OF FLOOR HEATING

Long-term studies have shown that when aluminum radiators are used, there is much greater economic savings than under floor heating.

SAVE TIME FOR HEATING

The underfloor heating system is much more difficult to adapt to the ambient temperature in which it is installed. Heat is transferred to the floor structure first, and then the heat spreads to the space of the heated room. Even this parameter proves that aluminum radiators are an ideal combination of comfort and energy savings.


EFFECTS IN THE ENVIRONMENT

Of 200 pieces of recycled aluminum cans, a design radiator can be produced.
Aluminum can be recycled indefinitely. The production of aluminum from aluminum waste brings up to 95% energy savings compared to primary aluminum production.

Ask

Downloads