OREGON Nogal 15x90 (1,08m2)

Frost resistance

Frost resistance is determined by the degree of water absorption of the tile (ie it does not provide water to freeze it). For tiles for indoor use is not required frost resistance and moisture absorption is usually more than 10 %. In contrast, frost-resistant glazed tiles have an absorption of up to 3 %. For exterior are suitable sintered tiles with water absorption below 0.5 %.

Porcelain tiles

By pushing into the mold under high pressure remains in the ceramics minimum of air bubbles. It is then fired at high temperatures, making the final product hard, strong and abrasion resistant. At the same time, it is less absorbent. Located universal use in interior and exterior, on walls and floors. Sintered paving is especially suited to high-stressed areas such as tiles or building facades.

Use of glazed tiles by abrasion resistance:

Class PEI II. - designed for floors rarely exposed mentioned pollution and regular shoes, eg. The living room except for entrance and similar areas.

Anti-Slip Rate

The slip resistance value is determined by the slip level on the inclined surface and is approved in most countries. According to the slip angle, they are classified into five classes with suitability for use in specific areas for the safe movement of persons.

R9: Slip angle from 6° to 10°
Suitable for interior spaces, stairways, corridors, dining rooms, offices.

Matte surface

Matt glaze tile.

Floor tiles

Tiles suitable for laying on the floor (= like tiles), also can be used for wall cladding.