Underfloor Heating Cable Fixing Rail, 50cm
|Recommended retail price incl. VAT||1,11 €/Piece|
|Your price excl. VAT||0,92 €/Piece|
|Your price incl. VAT||1,11 €/Piece|
stock > 10 Piece
Líbeznice: > 10 Piece
|Package weight||0,030 kg|
Plastic strip 0.5 m long for fixing heating cables with a diameter of 3-5.9 mm
- The bar is designed for indoor and outdoor applications.
- The fixing brackets on the rail are 1 cm apart, so the cable spacing can be changed to an accuracy of 1 cm as required, the overall height of the rail is 10 mm
- The edges of the rails are equipped with a locking lock, which enables the joining of the rails. 5 cm distances are numerically marked on each bar
Heating mats and Warm Tiles with increased protection in damp areas increase comfort when using the bathroom, toilet or kitchen. Using the wall thermostat, the desired floor temperature and switching time can be selected. The floor can be warm only in the morning and in the evening when you use the bathroom most often. The installation itself during the laying of the tiles is not complicated and will certainly pay off. The warm floor will enjoy bare feet not only in the winter months.
- Minimum mounting height 3-5 mm
- Mounting directly under the tile into flexible adhesive
- Suitable for any substrate, it can also be used for existing paving during the reconstruction
- Faster start of heating than with conventional systems
- Easy and fast installation during tiling
- Possibility to use as year-round or additional heating
- The possibility of heating selected areas or entire surfaces
- Simple operation via wall thermostat
- The goods are produced in the Czech Republic
Resistor cables are the most common type of heating cables. The core of these cables is the so-called resistance (resistive material) that is heated when the electric current passes.
The underside of the mat is fitted with a double-sided adhesive tape, allowing the mat to be fixed to the substrate rather than overlaid with flexible cement.
The heating mat is actually a heating circuit that is fixed to the fabric into loops with uniform spacing. The laying mat is considerably easier than for the heating cable, even distribution of the flat power is ensured.
Two-core heating cable - the connection wire is only at one end of the heating cable. When installing, it is not necessary to return with the cable back to the connection point.
The mat should not be placed under the furnishings such as bathtubs, showers, toilets, etc., as well as furniture that does not allow free air flow. Minimum spacing of heating cables from fittings (bathtub, shower, built-in wardrobe, kitchen ...) to prevent heat removal and the walls are 5 cm.
Installation and connection of two heating mats is possible. Linking is the mind of el. the mats are connected in parallel to the thermostat output - both mats are switched simultaneously. Connection of one mat on the other end is not possible.
By not using a sufficient layer of thermal insulation under the heating system, you are exposed to the risk of heat loss down into the floor. For optimal operating parameters, we recommend using our special ISOLA insulating washers.
How fast can you expect heating up? With additional isolation ISOLA approx. 10-15 minutes * ) , without additional insulation (according to floor composition) 1-3 hours, in extreme cases (floor without thermal insulation) the system can be practically inoperative.
* ) Increase of floor surface temperature from 20 ° C to approx. 27 ° C at air temperature 20-22 ° C.