TWIN COMBI Towel Radiator (middle connection) Thermostatic Valves, left/chrome

removed from the offer
Logo: Sapho
Order codeCP5012

Description

Properties

Brand   SAPHO
Colour   ChromeChrome Chrome
Possibility of heating   Combined heating - Electric/Central
Equipment   Center connection 50 mm, Thermostat, head left
Weight / Piece   0.96 kg
Packing   1 Piece
Guarantee   2 years

Explanations

Dual fuel heating

Dual fuel towel rails combine two types of heating - central and electric. They can be connected to the central heating system, and also to an electric socket. We recommend a heating rod with the same or similar performance according to the specification of the radiator.

If you have a heater with a central connection, in depends on whether the heating rod can be connected via a valve (in such case a combination valve is used) or whether the rod is connected separately to the side part of the radiator (using a conventional valve). In case of a side connection, a combination valve is always used. There is a choice of using a manual valve or a valve with a thermostatic head

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (Ø15 mm for copper and Ø16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.

Towel rail with a 50 mm connection spacing
Towel rail with side connection
Towel rail with a single-point connection

Description

TWIN COMBI

Design corner valve with thermostatic head designed for radiators with a central connection of 50 mm with an internal thread G1 / 2 ". It is suitable for connections where the customer assumes a combination with an electric heater. The valves are equipped with O-rings for reliable and quick installation.

  • color: chrome
  • connection spacing 50mm
  • corner design
  • thermostatic head on the left side

ATTENTION!
When ordering the set, it is necessary to order a compression fitting (not included), see accessories.

The water supply is at the thermostatic head.

The non-return valve is hidden under the decorative cover. It is closed with a hexagonal key. It does not serve to regulate the temperature, only to close the pipes, eg in the case of dismantling the radiator, without the need to drain the heating medium.

Ask

Downloads