PINI P bathroom radiator 608x1154mm, 669W, white
|Suggested el. heater||600W|
|Possibility of heating||Combination el. Energy/Water , Electric Heating , Central heating|
|Spacing connection||558 mm mm|
|Package weight||13,111 kg|
Illustrative photo - the arrangement and the exact number of horizontal pipes depends on the specific size of the radiator - see. technical drawing
- central heating
- electric heating
- combination of central and electric heating
Recommended connection sets: CORNER, CORNER COMBI, MONO ONE, COMPACT - see accessories
The heating rod is not part of the radiator. You will find the appropriate type in the accessories.
Classical straight tube radiator with the possibility of a combination of central and electric heating
Combination of central and electric heating
Possibilities of "extreme" connection of heating ladders
1. Central heating - hand valve
CUBE Set COMPACT Set Copper Screw ALU Plug Covering Rope
If you decide to buy a ladder of this type, you need to choose a suitable attachment kit.
If the heating is to be used only for hot water heating without a thermostatic head, it is necessary to purchase a connection set
eg COMPACT or CUBE (according to heating design).
The CUBE is available in chrome, stainless steel or silver.
The COMPACT kit is available in chrome only. COMPACT and CUBE do not distinguish the right / left variant.
ADVICE! Tail pipe openings are not always perfectly executed, so we recommend that you purchase a set of cover rosettes. Covering rosettes serve to cover Cu or Alupex pipes and unclean openings in the wall. Covering rosettes are available in chrome or stainless steel.
ATTENTION! Our design valves have a special thread 24-19, so for each valve we have to buy the recommended clamping fittings according to the material and diameter of the pipe - copper / alupex.
Clamps are available in chrome or stainless steel.
2. Central heating - valve with thermostatic head
Set CORNER Copper fittings ALU fittings Covering rosettes
If you decide on a thermostatic variant, we recommend the CORNER version :
ADVICE! The CORNER is available in right / left version. The figure above shows the right option - the hot water supply is on the right, as well as the thermostat itself is located to the right (always in the front view). We recommend selecting the valve so that the head always points in the direction of the horizontal profiles of the heater, not on the opposite side (outside the heater). The triaxial design of the valve allows the valve head to be hidden beneath the radiator and thus does not occupy the space in the space.
The CORNER is available in chrome or stainless steel.
ATTENTION! The above-mentioned clamping fitting for heating assembling + cover rosette. Available color variation of chrome fitting or stainless steel. Covering rosettes are available in chrome or stainless steel.
3. Combined heating - valve with thermostatic head
Corner COMBI Heating rod Copper fittings ALU coupling Covering rosettes
If you decide to use the heater for both hot and electric heating, we recommend the CORNER COMBI connection set + heating rod:
ADVICE! The heating rod can be retrofitted, but this option is not recommended due to the probable need to dismantle the heating ladder and release the heating circuit. To select the heating rod, refer to variant 4.
ATTENTION! Again, it is necessary to select the right version of the left / right valve, see the above information.
The CORNER COMBI is available in chrome or stainless steel.
ATTENTION! Clamping screw + cover rosettes.
Available color variation of chrome fitting or stainless steel. Covering rosettes are available in chrome or stainless steel.
4. Electrical heating - with thermostatic heating rod
When choosing electric heating we offer a wide selection of heating rods - ONE, ONE-D, MOA, KTX, GV ...
ADVICE! The heating rod selects the client according to his own taste, design and performance!
ATTENTION! The heating rod must be of adequate power according to the specification of the heater or the closest lower possible.
If the heating is only electrically heated, it is necessary to fill the heater with an anti-corrosion freeze heat-resistant liquid. It is also necessary to purchase a ½ "plug for radiators.