Items in Basket Amount |
0
0,00 €
|
---|
ASTRA OW Freestanding Bath 165x75x61cm, White, Panel Oak Ferrara
Description
Properties
Brand | POLYSAN | |
---|---|---|
Size | 165x75x61 cm | |
Length | 1650 mm | |
Width | 750 mm | |
Height | 610 mm | |
Volume | 255 l | |
Colour | Brown | |
Material | Acrylate | |
Decor | white/oak ferrara | |
Shape | Freestanding | |
Installation | Independent | |
Waste diameter | 52 mm | |
Weight / Piece | 41.35 kg | |
Packing | 1 Piece | |
Guarantee | 10 years |
Explanations
Akrylate
All acrylic bathtubs and shower trays are made of acrylic sheets. Unlike co-extruded acrylic sheets which having a softer surface and a lower chemical resistance, are produce by casting. Exceptionally strong, durable, scratch and chemical resistant, these is warm to touch and comes in an infinite array of rich colours and effects. It can be thermoformed easily.
Description
Freestanding acrylic bath in the oak ferrara lining - this is the design delicacy of the Czech manufacturer POLYSAN. The cladding of the Austrian company EGGER is made of water-resistant plywood, resistant to high humidity and water. This material is also used to make kitchen worktops.
The entire self-supporting cladding construction is on height-adjustable plastic feet. A tub is fitted into this structure, which also has adjustable feet, which allows a better alignment of the entire tub to a horizontal position. So the bathtub does not fit the lining structure, but with a minimal expansion joint above it. This joint must be filled with silicone, preferably transparent.
- Lining material: waterproof plywood EGGER - color 1334 OAK FERRARA
- It is necessary to order a long min. 675 mm.
- We provide a 7-year warranty on the POLYSAN bath made of acrylic. The condition of guarantee is correct installation according to the instructions, including the use of the original design.
Surface Maintenance:
Wash the laminate with a soft sponge or cloth soaked in normal detergent (Jar, PUR). Do not use abrasive sponges and aggressive solvents.
HEAVY SHELL (POLYSAN only)
Polysan uses the most modern technology of the British company Armor Ltd. in the production of bathtubs and trays. The bottom of the Polysan bath is reinforced with a special HEAVY SHELL layer in comparison with the competing baths, thus ensuring higher rigidity of the bath. The baths are not cured by heat shock, they mature to the maximum hardness at 20 ° C after removal from the mold. The result is a perfectly flat and smooth surface without the so-called orange effect.