Items in Basket Amount |
0
0,00 €
|
---|
FLUE stainless steel shower drain with grid, 630x115x82mm
Description
Properties
Brand | POLYSAN | |
---|---|---|
Series | FLUE | |
Size | 63x11,5x8,2 cm | |
Length | 630 mm | |
Width | 115 mm | |
Height | 82 mm | |
Colour | Stainless steel | |
Material | Stainless steel | |
Installation | Freestanding | |
Waste diameter | 50 mm | |
Shower channel length from | 630 mm | |
Shower channel length to | 630 mm | |
Weight / Piece | 2.65 kg | |
Packing | 1 Piece | |
Guarantee | 2 years |
Description
Stainless steel shower channel with grate
- Siphon ABS
- Easy maintenance
- Adjustable legs 4 pcs
- Installation height 82-110 mm
- Grate width 73 mm
- Flow rate 48l / min.
Series description
Shower channel FLUE
- It serves for drainage of floor surfaces inside buildings, especially shower enclosures and bathrooms, where it replaces shower tray or floor drain
- The drain body is made of AISI 304 stainless steel
- The grating is made of polished stainless steel AISI 304
- Height adjustable feet: help set the channel in the required position and height of 82-110 mm
- Easy to clean: removing the inlet from the siphon provides full access to the drain and cleaning
- Plastic siphon: with anti-odor cap and sufficient water flow (48 l / min) for most common showers
NOTICE!
- The drainage capacity of the gutter is determined not only by the drainage capacity of the gutter itself, but also by the discharge piping to which it will be connected
- The length of the drain pipe to the vertical drain pipe must be as short as possible
- There must be as few bends as possible in the drain pipe
- The drain pipe must have a sufficient gradient of at least 2 cm / rm. The shower channels are available in various standard lengths so that the most suitable size can always be selected.