ELIT bathroom radiator left/right 575x1658mm, 791W, silver

Combination of glossy and matt material
removed from the offer
Logo: Sapho
Order codeE-617

Description

Properties

Brand   SAPHO
Series   ELIT
Size   575x1658 mm
Width   575 mm
Height   1658 mm
Volume   7.5 l
Colour   SilverSilver Silver
Material   Steel
Shape   E-Shape
Suggested el. heater   600 W
Possibility of heating   Electric Heating, Combined heating - Electric/Central, Central heating
Spacing connection 50 mm   Symmetric (Center)
Spacing connection   50 mm
Output   791 W
Weight / Piece   22.5 kg
Packing   1 Piece
Guarantee   2 years

Explanations

Electric heating

If the heater is only heated electrically, i.e. only a heating rod is used, a 1/2" radiator plug must be purchased additionaly. This serves to plug the other hole in the heater which would otherwise be used for the central heating connection valve. We recommend filling the heater with distilled water. It is also recommended to pour in the LIKIDO antifreeze and anti-corrosive heat transfer fluid.
It is necessary to use a heating rod with the same or similar performance according to the specification of the radiator. For heating rods with a thermostat, the temperature of the liquid in the heater is controlled.

Towel rail with a 50 mm connection spacing
Towel rail with side connection

Dual fuel heating

Dual fuel towel rails combine two types of heating - central and electric. They can be connected to the central heating system, and also to an electric socket. We recommend a heating rod with the same or similar performance according to the specification of the radiator.

If you have a heater with a central connection, in depends on whether the heating rod can be connected via a valve (in such case a combination valve is used) or whether the rod is connected separately to the side part of the radiator (using a conventional valve). In case of a side connection, a combination valve is always used. There is a choice of using a manual valve or a valve with a thermostatic head

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (Ø15 mm for copper and Ø16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.

Towel rail with a 50 mm connection spacing
Towel rail with side connection
Towel rail with a single-point connection

Central heating

In the case of central heating, the selection of the connection valves is very important. You can choose between using a manual valve or a valve with a thermostatic head.

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (Ø15 mm for copper and Ø16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.

Towel rail with a 50 mm connection spacing
Towel rail with side connection
Towel rail with a single-point connection

Description

Radiator in silver metallic color with decorative chrome strip.

Universal for left and right variant.

Illustrative photo - arrangement and exact number of horizontal tubes depends on the specific size of the radiator - see. technical drawing.

Connectivity options:
- central heating
- electric heating
- a combination of central and electric heating

Recommended connection sets: TWIN, COMPACT, TWIN COMBI - see. accessories.

The heating rod is not part of the radiator. A suitable type can be found in the accessories.

If the radiator is heated only electrically, it is necessary to buy a ku “plug for the radiator (see accessories).

Series description

Elegant and fully functional radiator with a unique design based on a decorative collector with a chrome strip. In the right and left versions. In addition, this model has the advantage of hanging towels directly on the construction without additional hooks.

Combination of central and electric heating

Electrical heating

Central heating

Extended Warranty

These radiators can be ordered on demand in any Enix pattern from one piece. A download template under the Enix brand profile (after clicking on the product logo) or at http://enix.pl/kolory/?lang=en .

Options for "central" connection of heating ladders

1. Central heating - hand valve

CUBE Set COMPACT Set Copper Screw ALU Plug Covering Rope

If you decide to buy a ladder of this type, you need to choose a suitable attachment kit.

If the heating is to be used only for hot water heating without a thermostatic head, it is necessary to purchase a connection set
eg COMPACT or CUBE (according to heating design).
The CUBE is available in chrome, stainless steel or silver.
The COMPACT kit is available in chrome only. COMPACT and CUBE do not distinguish the right / left variant.
ADVICE! Tail pipe openings are not always perfect, so we recommend that you buy a set of cover rosettes. Covering rosettes serve to cover Cu or Alupex pipes and unclean openings in the wall.
Covering rosettes are available in chrome or stainless steel.
ATTENTION! Our design valves have a special thread 24-19, so for each valve we have to buy the recommended clamping fittings according to the material and diameter of the pipe - copper / alupex.
Clamps are available in chrome or stainless steel.


2. Central heating - valve with thermostatic head

TWIN connection Copper fittings ALU coupling Covering rosette

If you decide on a thermostatic variant, we recommend the TWIN design :

The TWIN set is available in chrome or stainless steel.
ADVICE! The TWIN set is available in right / left variant. The figure above shows the left option. This means that the hot water supply is to the left, as well as the thermo head itself on the left (always at the front view). We recommend selecting the valve so that the head always faces in the direction of the horizontal profiles of the heater and not on the opposite side.
ATTENTION! The above-mentioned clamping fitting for heating assembling + cover rosette.
Available color variation of clamping fitting - chrome or brushed stainless steel.


3. Combined heating - valve with thermostatic head

Heating rod Copper fitting ALU coupling Covering rosette

If you decide to use the heater for both hot-water and electric heating, we recommend the TWIN COMBI connection set + heating rod :

ATTENTION! Again, choose the right version of the left / right side, see the information above.
TWIN COMBI is available in chrome or stainless steel.
ATTENTION! Clamping screw + cover rosette.
Available color variation of clamping fitting - chrome or brushed stainless steel.
Covering rosettes are available in chrome or stainless steel.
ADVICE! The heating rod can be retrofitted, but this option is not recommended due to the probable need to dismantle the heating ladder and release the heating circuit. To select the heating rod, refer to variant 4.
Available color variation of chrome fitting or stainless steel. Covering rosettes are available in chrome or stainless steel.


4. Electrical heating - with thermostatic heating rod

When choosing electric heating we offer a wide selection of heating rods - ONE, ONE-D, MOA, KTX, GV ...
ADVICE! The heating rod selects the client according to his own taste, design and performance!
ATTENTION! The heating rod must be of adequate power according to the specification of the heater or the closest lower possible.

If the heater is heated only electrically, it is necessary to fill the heater with an anti-corrosion freeze-free anti-corrosion fluid such as LIKIDO . It is also necessary to purchase a ½ "plug for radiators.

Ask

Downloads

Documents - Instruction