Items in Basket Amount |
0
0,00 €
|
---|
CUBE COMBI Towel Radiator Angled Valve Set, right, chrome
Description
Properties
Brand | SAPHO | |
---|---|---|
Colour | Chrome | |
Possibility of heating | Combined heating - Electric/Central | |
Equipment | Corners | |
Weight / Piece | 1.09 kg | |
Packing | 1 Piece | |
Guarantee | 2 years |
Explanations
Dual fuel heating
Dual fuel towel rails combine two types of heating - central and electric. They can be connected to the central heating system, and also to an electric socket. We recommend a heating rod with the same or similar performance according to the specification of the radiator.
If you have a heater with a central connection, in depends on whether the heating rod can be connected via a valve (in such case a combination valve is used) or whether the rod is connected separately to the side part of the radiator (using a conventional valve). In case of a side connection, a combination valve is always used. There is a choice of using a manual valve or a valve with a thermostatic head
Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).
The connection valves we offer are supplied with a clamping fitting for the most common pipes (Ø15 mm for copper and Ø16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.
Description
CUBE COMBI
Design set of manual valves without thermostatic head for connecting square design radiators with G1 / 2 "female thread
The valves are fitted with O-ring seals for reliable and quick installation.
The set is suitable for connecting radiators, where the customer expects a combination with an electric heater.
- color: chrome
- corner right design
ATTENTION!
When ordering the set, it is necessary to order a compression fitting (not included) - see. accessories.
The non-return valve is hidden under the decorative cover. It is closed with a hexagonal key. It does not serve to regulate the temperature, only to close the pipes, eg in the case of dismantling the radiator, without the need to drain the heating medium.