BLOCK bathroom radiator 500x1465 mm, black matt

  excl. VAT incl. VAT
Your price / Piece 919,00 € 1 111,99 €
expected
Restock: Week 17 2024
Piece

Logo: Sapho
Order codeIR185

Description

Properties

Brand   SAPHO
Series   BLOCK
Size   500x1465 mm
Width   500 mm
Height   1465 mm
Volume   11.2 l
Colour   Black matBlack mat Black mat
Material   Steel
Shape   Frame
Suggested el. heater   600 W
Possibility of heating   Electric Heating, Combined heating - Electric/Central, Central heating
Spacing connection 50 mm   Symmetric (Center)
Spacing connection   50 mm
Output   644 W
Temperature gradient   75/65/20 °C
Weight / Piece   20.53 kg
Packing   1 Piece
Guarantee   2 years

Explanations

Electric heating

If the heater is only heated electrically, i.e. only a heating rod is used, a 1/2" radiator plug must be purchased additionaly. This serves to plug the other hole in the heater which would otherwise be used for the central heating connection valve. We recommend filling the heater with distilled water. It is also recommended to pour in the LIKIDO antifreeze and anti-corrosive heat transfer fluid.
It is necessary to use a heating rod with the same or similar performance according to the specification of the radiator. For heating rods with a thermostat, the temperature of the liquid in the heater is controlled.

Towel rail with a 50 mm connection spacing
Towel rail with side connection

Dual fuel heating

Dual fuel towel rails combine two types of heating - central and electric. They can be connected to the central heating system, and also to an electric socket. We recommend a heating rod with the same or similar performance according to the specification of the radiator.

If you have a heater with a central connection, in depends on whether the heating rod can be connected via a valve (in such case a combination valve is used) or whether the rod is connected separately to the side part of the radiator (using a conventional valve). In case of a side connection, a combination valve is always used. There is a choice of using a manual valve or a valve with a thermostatic head

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (Ø15 mm for copper and Ø16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.

Towel rail with a 50 mm connection spacing
Towel rail with side connection
Towel rail with a single-point connection

Central heating

In the case of central heating, the selection of the connection valves is very important. You can choose between using a manual valve or a valve with a thermostatic head.

Manual valve: the valve control head can be installed on the left/right side regardless of the hot water supply location. The temperatur eis controlled manually.
A valve with a thermostatic head: the integrated thermostat maintains the temperature inside the towel rail. The thermostatic head must be located at the hot water inlet (except MONO ONE).

The connection valves we offer are supplied with a clamping fitting for the most common pipes (Ø15 mm for copper and Ø16 mm for Alupex), so there is no need to buy anything else for the connection. For covering the inlet pipes and holes in the wall, we recommend the addition of cover rosettes.

Towel rail with a 50 mm connection spacing
Towel rail with side connection
Towel rail with a single-point connection

Series description

Design radiator in two color variants and two dimensions. Although the heater has a central connection, heating rods can also be used with it.

  • Heating rod and connecting valves are not included

Ask

Downloads

Documents - Instruction

Documents - 3D models