ALTALENA Towel Radiator 600x1610mm, 885 W, metallic anthracit

The radiator can be mounted on both sides
The radiator is not only a source of heat, but also a design element in the bathroom
removed from the offer
Similar products
Logo: Sapho
Order codeIR176
BrandSapho
SeriesALTALENA
ColourAnthraciteAnthracite Anthracite
Suggested el. heater800W
Material Steel
Possibility of heatingElectric Heating , Central heating , Combination el. Energy/Water
Size600x1610 mm
Spacing connection50 mm
Spacing connection 50 mmSymmetric (Centered)
Width600 mm
Height1610 mm
Volume10.4 l
ShapeShape E
Performance885 W
Guarantee24 months
Package weight35,000 kg
EAN8590913831201

Variants

Description

Heating element

Recommended connection set -TWIN - see. accessories

The heating rod is not part of the radiator. A suitable type can be found in the accessories.

If the radiator is heated only electrically, it is necessary to buy a ku " plug for the radiator (see accessories).

The radiator is not only a source of heat but also a design element in your bathroom. It is also very practical for towel drying and maintenance.

Center connection with 50 mm pitch. The radiator can be hung on both sides.

Combination of central and electric heating

Electrical heating

Central heating

Options for "central" connection of heating ladders

1. Central heating - hand valve

CUBE Set COMPACT Set Copper Screw ALU Plug Covering Rope

If you decide to buy a ladder of this type, you need to choose a suitable attachment kit.

If the heating is to be used only for hot water heating without a thermostatic head, it is necessary to purchase a connection set
eg COMPACT or CUBE (according to heating design).
The CUBE is available in chrome, stainless steel or silver.
The COMPACT kit is available in chrome only. COMPACT and CUBE do not distinguish the right / left variant.
ADVICE! Tail pipe openings are not always perfect, so we recommend that you buy a set of cover rosettes.
Covering rosettes serve to cover Cu or Alupex pipes and unclean openings in the wall.
Covering rosettes are available in chrome or stainless steel.
ATTENTION! Our design valves have a special thread 24-19, so it is necessary to buy the valve for each one
clamping fitting according to material and pipe diameter - copper / alupex.
Clamps are available in chrome or stainless steel.


2. Central heating - valve with thermostatic head

TWIN connection Copper fittings ALU coupling Covering rosette

If you decide on a thermostatic variant, we recommend the TWIN design :

The TWIN set is available in chrome or stainless steel.
ADVICE! The TWIN set is available in right / left variant. The figure above shows the left option. This means that the hot water supply is to the left, as well as the thermo head itself on the left (always at the front view). We recommend selecting the valve so that the head always faces in the direction of the horizontal profiles of the heater and not on the opposite side.
ATTENTION! The above-mentioned clamping fitting for heating assembling + cover rosette.
Available color variation of clamping fitting - chrome or brushed stainless steel.


3. Combined heating - valve with thermostatic head

Heating rod Copper fitting ALU coupling Covering rosette

If you decide to use the heater for both hot-water and electric heating, we recommend the TWIN COMBI connection set + heating rod :

ATTENTION! Again, choose the right version of the left / right side, see the information above.
TWIN COMBI is available in chrome or stainless steel.
ATTENTION! Clamping screw + cover rosette.
Available color variation of clamping fitting - chrome or brushed stainless steel.
Covering rosettes are available in chrome or stainless steel.
ADVICE! The heating rod can be retrofitted, but this option is not recommended due to the probable need to dismantle the heating ladder and release the heating circuit. To select the heating rod, refer to variant 4.
Available color variation of chrome fitting or stainless steel. Covering rosettes are available in chrome or stainless steel.


4. Electrical heating - with thermostatic heating rod

When choosing electric heating we offer a wide selection of heating rods - ONE, ONE-D, MOA, KTX, GV ...
ADVICE! The heating rod selects the client according to his own taste, design and performance!
ATTENTION! The heating rod must be of adequate power according to the specification of the heater or the closest lower possible.

If the heater is heated only electrically, it is necessary to fill the heater with an anti-corrosion freeze-free anti-corrosion fluid such as LIKIDO. It is also necessary to purchase a ½ "plug for radiators.

Ask

Sales assistant

Photo: Baštová Eva

Baštová Eva

Downloads

Instruction 3.7 MB